Linux en Espanol
 
Lectora tarjeta SD (tema #25047)
Publicar nuevo tema  Responder al tema    Foros de discusión -> Estaciones de Trabajo
Autor Mensaje
Daniel Chiesa
Forista
Registrado: 2014-09-22
Mensajes: 7

Publicado: 2014-09-22 17:53:57    Asunto: Lectora tarjeta SD

Buenas tardes he instalado Debian y no funciona la lectora SD del port?til, dejo algunos datos, si alguien me puede ayudar muy agradecido:

lsb_release -a
No LSB modules are available.
Distributor ID: Debian
Description: Debian GNU/Linux 7.6 (wheezy)
Release: 7.6
Codename: wheezy

lspci
00:00.0 Host bridge: Advanced Micro Devices [AMD] Family 16h Processor Root Complex
00:01.0 VGA compatible controller: Advanced Micro Devices [AMD] nee ATI Device 9834
00:01.1 Audio device: Advanced Micro Devices [AMD] nee ATI Device 9840
00:02.0 Host bridge: Advanced Micro Devices [AMD] Family 16h Processor Function 0
00:02.1 PCI bridge: Advanced Micro Devices [AMD] Family 16h Processor Functions 5:1
00:02.3 PCI bridge: Advanced Micro Devices [AMD] Family 16h Processor Functions 5:1
00:02.4 PCI bridge: Advanced Micro Devices [AMD] Family 16h Processor Functions 5:1
00:02.5 PCI bridge: Advanced Micro Devices [AMD] Family 16h Processor Functions 5:1
00:10.0 USB controller: Advanced Micro Devices [AMD] FCH USB XHCI Controller (rev 01)
00:11.0 SATA controller: Advanced Micro Devices [AMD] FCH SATA Controller [AHCI mode]
00:12.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 39)
00:12.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 39)
00:13.0 USB controller: Advanced Micro Devices [AMD] FCH USB OHCI Controller (rev 39)
00:13.2 USB controller: Advanced Micro Devices [AMD] FCH USB EHCI Controller (rev 39)
00:14.0 SMBus: Advanced Micro Devices [AMD] FCH SMBus Controller (rev 3a)
00:14.2 Audio device: Advanced Micro Devices [AMD] FCH Azalia Controller (rev 02)
00:14.3 ISA bridge: Advanced Micro Devices [AMD] FCH LPC Bridge (rev 11)
00:14.7 SD Host controller: Advanced Micro Devices [AMD] FCH SD Flash Controller (rev 01)
00:18.0 Host bridge: Advanced Micro Devices [AMD] Family 16h Processor Function 0
00:18.1 Host bridge: Advanced Micro Devices [AMD] Family 16h Processor Function 1
00:18.2 Host bridge: Advanced Micro Devices [AMD] Family 16h Processor Function 2
00:18.3 Host bridge: Advanced Micro Devices [AMD] Family 16h Processor Function 3
00:18.4 Host bridge: Advanced Micro Devices [AMD] Family 16h Processor Function 4
00:18.5 Host bridge: Advanced Micro Devices [AMD] Family 16h Processor Function 5
02:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5229 PCI Express Card Reader (rev 01)
03:00.0 Network controller: Atheros Communications Inc. AR9485 Wireless Network Adapter (rev 01)
04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 07)

lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 2
On-line CPU(s) list: 0,1
Thread(s) per core: 1
Core(s) per socket: 2
Socket(s): 1
NUMA node(s): 1
Vendor ID: AuthenticAMD
CPU family: 22
Model: 0
Stepping: 1
CPU MHz: 800.000
BogoMIPS: 1996.12
Virtualization: AMD-V
L1d cache: 32K
L1i cache: 32K
L2 cache: 1024K
NUMA node0 CPU(s): 0,1

Saludos !
TheBalrog
BOFH
Registrado: 2004-04-05
Mensajes: 3012

Publicado: 2014-09-22 19:04:32    Asunto:

?Qu? ocurre cuando la insertas y haces un dmesg?
Daniel Chiesa
Forista
Registrado: 2014-09-22
Mensajes: 7

Publicado: 2014-09-22 21:09:59    Asunto:

De todos los datos que env?a ser? este el importante?:

2.539416] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.539426] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.539618] sd 0:0:0:0: [sda] Write Protect is off
[ 2.539626] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.539709] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.580967] sda: sda1 sda2 sda3
[ 2.582172] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.587625] sd 0:0:0:0: Attached scsi generic sg0 type 0
TheBalrog
BOFH
Registrado: 2004-04-05
Mensajes: 3012

Publicado: 2014-09-22 21:25:33    Asunto:

Lo importante son los mensajes que genera cuando insertas la memoria. Eso nos dir? si est? reconociendo el dispositivo o no, pues debemos diferencias entre que lo reconozca a que lo monte.

Primero es identificar que reconocas el dispositivo.
Daniel Chiesa
Forista
Registrado: 2014-09-22
Mensajes: 7

Publicado: 2014-09-23 17:29:59    Asunto:

hola, cuando introduzco la tarjeta no la reconoce, si enciendo la pc con la tarjeta puesta tampoco, tuve instalado ubuntu (no funcionaba bien por eso lo cambi?) y la reconoc?a.
Espero te sirvan estos datos.
Saludos cordiales.
TheBalrog
BOFH
Registrado: 2004-04-05
Mensajes: 3012

Publicado: 2014-09-23 17:38:27    Asunto:

No me dice nada relevante. Como ya dije, lo primero es que el sistema reconozca que haz introducido un medio de almacenamiento. Una vez que lo tengamos clara, veremos por qu? no la monta.
Daniel Chiesa
Forista
Registrado: 2014-09-22
Mensajes: 7

Publicado: 2014-09-23 19:50:59    Asunto:

ok, le pedir?a por favor los comandos que tengo que hacer. Hya varias cosas que no manejo aun de linux. gracias y saludos.
Daniel Chiesa
Forista
Registrado: 2014-09-22
Mensajes: 7

Publicado: 2014-09-23 19:52:28    Asunto:

yo inserto la memoria y es como si nada hubiese pasado.
TheBalrog
BOFH
Registrado: 2004-04-05
Mensajes: 3012

Publicado: 2014-09-23 20:25:18    Asunto:

[quote:b3abda50d1="TheBalrog"]?Qu? ocurre cuando la insertas y haces un dmesg?[/quote:b3abda50d1]

Justo esto.
Daniel Chiesa
Forista
Registrado: 2014-09-22
Mensajes: 7

Publicado: 2014-09-24 01:32:33    Asunto: esto es lo que responde una vez puesta la tarjeta sd

[ 0.703823] pnp 00:07: [io 0x0060]
[ 0.703829] pnp 00:07: [io 0x0064]
[ 0.703842] pnp 00:07: [irq 1]
[ 0.703942] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.703981] pnp 00:08: [irq 12]
[ 0.704113] pnp 00:08: Plug and Play ACPI device, IDs SYN1ead PNP0f13 (active)
[ 0.704152] pnp 00:09: [io 0x0010-0x001f]
[ 0.704158] pnp 00:09: [io 0x002e-0x002f]
[ 0.704164] pnp 00:09: [io 0x0072-0x0073]
[ 0.704170] pnp 00:09: [io 0x0080]
[ 0.704175] pnp 00:09: [io 0x00b0-0x00b1]
[ 0.704180] pnp 00:09: [io 0x0092]
[ 0.704186] pnp 00:09: [io 0x0400-0x04cf]
[ 0.704192] pnp 00:09: [io 0x04d0-0x04d1]
[ 0.704197] pnp 00:09: [io 0x04d6]
[ 0.704202] pnp 00:09: [io 0x0680-0x06ff]
[ 0.704208] pnp 00:09: [io 0x077a]
[ 0.704213] pnp 00:09: [io 0x0c00-0x0c01]
[ 0.704218] pnp 00:09: [io 0x0c14]
[ 0.704223] pnp 00:09: [io 0x0c50-0x0c52]
[ 0.704229] pnp 00:09: [io 0x0c6c]
[ 0.704234] pnp 00:09: [io 0x0c6f]
[ 0.704239] pnp 00:09: [io 0x0cd0-0x0cdb]
[ 0.704244] pnp 00:09: [io 0x0840-0x0847]
[ 0.704412] system 00:09: [io 0x0400-0x04cf] has been reserved
[ 0.704421] system 00:09: [io 0x04d0-0x04d1] has been reserved
[ 0.704429] system 00:09: [io 0x04d6] has been reserved
[ 0.704437] system 00:09: [io 0x0680-0x06ff] has been reserved
[ 0.704445] system 00:09: [io 0x077a] has been reserved
[ 0.704453] system 00:09: [io 0x0c00-0x0c01] has been reserved
[ 0.704461] system 00:09: [io 0x0c14] has been reserved
[ 0.704468] system 00:09: [io 0x0c50-0x0c52] has been reserved
[ 0.704476] system 00:09: [io 0x0c6c] has been reserved
[ 0.704484] system 00:09: [io 0x0c6f] has been reserved
[ 0.704491] system 00:09: [io 0x0cd0-0x0cdb] has been reserved
[ 0.704499] system 00:09: [io 0x0840-0x0847] has been reserved
[ 0.704509] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.704675] pnp 00:0a: [mem 0x000e0000-0x000fffff]
[ 0.704682] pnp 00:0a: [mem 0xffc00000-0xffffffff]
[ 0.704833] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.704843] system 00:0a: [mem 0xffc00000-0xffffffff] has been reserved
[ 0.704853] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.770044] pnp: PnP ACPI: found 11 devices
[ 0.770053] ACPI: ACPI bus type pnp unregistered
[ 0.781744] pci 0000:00:01.0: address space collision: [mem 0xfffe0000-0xffffffff pref] conflicts with reserved [mem 0xffc00000-0xffffffff]
[ 0.781790] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
[ 0.781806] PCI: max bus depth: 1 pci_try_num: 2
[ 0.781882] pci 0000:00:02.4: BAR 15: assigned [mem 0xf0d00000-0xf0dfffff pref]
[ 0.781902] pci 0000:00:01.0: BAR 6: assigned [mem 0xf0c60000-0xf0c7ffff pref]
[ 0.781920] pci 0000:00:02.1: BAR 14: assigned [mem 0xf0e00000-0xf0ffffff]
[ 0.781939] pci 0000:00:02.1: BAR 15: assigned [mem 0xf1000000-0xf11fffff 64bit pref]
[ 0.781953] pci 0000:00:02.1: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.781961] pci 0000:00:02.1: PCI bridge to [bus 01-01]
[ 0.781969] pci 0000:00:02.1: bridge window [io 0x1000-0x1fff]
[ 0.781979] pci 0000:00:02.1: bridge window [mem 0xf0e00000-0xf0ffffff]
[ 0.781988] pci 0000:00:02.1: bridge window [mem 0xf1000000-0xf11fffff 64bit pref]
[ 0.782000] pci 0000:00:02.3: PCI bridge to [bus 02-02]
[ 0.782009] pci 0000:00:02.3: bridge window [mem 0xf0b00000-0xf0bfffff]
[ 0.782025] pci 0000:03:00.0: BAR 6: assigned [mem 0xf0d00000-0xf0d0ffff pref]
[ 0.782032] pci 0000:00:02.4: PCI bridge to [bus 03-03]
[ 0.782041] pci 0000:00:02.4: bridge window [mem 0xf0a00000-0xf0afffff]
[ 0.782050] pci 0000:00:02.4: bridge window [mem 0xf0d00000-0xf0dfffff pref]
[ 0.782061] pci 0000:00:02.5: PCI bridge to [bus 04-04]
[ 0.782068] pci 0000:00:02.5: bridge window [io 0x2000-0x2fff]
[ 0.782078] pci 0000:00:02.5: bridge window [mem 0xf0900000-0xf09fffff]
[ 0.782086] pci 0000:00:02.5: bridge window [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.782141] pci 0000:00:02.1: setting latency timer to 64
[ 0.782170] pci 0000:00:02.3: setting latency timer to 64
[ 0.782197] pci 0000:00:02.4: setting latency timer to 64
[ 0.782214] pci 0000:00:02.5: setting latency timer to 64
[ 0.782223] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.782230] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.782236] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.782243] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.782249] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.782256] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.782262] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.782269] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.782275] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.782282] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.782288] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.782295] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.782301] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.782308] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.782314] pci_bus 0000:00: resource 18 [mem 0xe0000000-0xf7ffffff]
[ 0.782321] pci_bus 0000:00: resource 19 [mem 0xfc000000-0xfed3ffff]
[ 0.782328] pci_bus 0000:00: resource 20 [mem 0xfed45000-0xffffffff]
[ 0.782335] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.782341] pci_bus 0000:01: resource 1 [mem 0xf0e00000-0xf0ffffff]
[ 0.782348] pci_bus 0000:01: resource 2 [mem 0xf1000000-0xf11fffff 64bit pref]
[ 0.782355] pci_bus 0000:02: resource 1 [mem 0xf0b00000-0xf0bfffff]
[ 0.782363] pci_bus 0000:03: resource 1 [mem 0xf0a00000-0xf0afffff]
[ 0.782369] pci_bus 0000:03: resource 2 [mem 0xf0d00000-0xf0dfffff pref]
[ 0.782376] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.782382] pci_bus 0000:04: resource 1 [mem 0xf0900000-0xf09fffff]
[ 0.782389] pci_bus 0000:04: resource 2 [mem 0xf0800000-0xf08fffff 64bit pref]
[ 0.782603] NET: Registered protocol family 2
[ 0.782979] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.785502] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.789436] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.789901] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.789912] TCP reno registered
[ 0.789966] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.790022] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.790367] NET: Registered protocol family 1
[ 0.790410] pci 0000:00:01.0: Boot video device
[ 0.936507] PCI: CLS 64 bytes, default 64
[ 0.936658] Unpacking initramfs...
[ 1.574829] Freeing initrd memory: 10232k freed
[ 1.579932] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.579946] Placing 64MB software IO TLB between ffff8800bb17d000 - ffff8800bf17d000
[ 1.579954] software IO TLB at phys 0xbb17d000 - 0xbf17d000
[ 1.580074] Simple Boot Flag at 0x44 set to 0x1
[ 1.580759] perf: AMD IBS detected (0x000000ff)
[ 1.581262] audit: initializing netlink socket (disabled)
[ 1.581294] type=2000 audit(1411501330.576:1): initialized
[ 1.625378] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.627089] VFS: Disk quotas dquot_6.5.2
[ 1.627175] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.627357] msgmni has been set to 6859
[ 1.627780] alg: No test for stdrng (krng)
[ 1.627861] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.627870] io scheduler noop registered
[ 1.627875] io scheduler deadline registered
[ 1.627923] io scheduler cfq registered (default)
[ 1.628523] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 1.628587] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 1.628593] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 1.629673] ERST: Table is not found!
[ 1.629679] GHES: HEST is not enabled!
[ 1.629876] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.689524] Linux agpgart interface v0.103
[ 1.689911] i8042: PNP: PS/2 Controller [PNP0303:KBC1,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 1.707878] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.707899] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.708339] mousedev: PS/2 mouse device common for all mice
[ 1.708448] rtc_cmos 00:05: RTC can wake from S4
[ 1.708652] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.708690] rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
[ 1.708720] cpuidle: using governor ladder
[ 1.708726] cpuidle: using governor menu
[ 1.709295] TCP cubic registered
[ 1.709469] NET: Registered protocol family 10
[ 1.710916] Mobile IPv6
[ 1.710924] NET: Registered protocol family 17
[ 1.710937] Registering the dns_resolver key type
[ 1.711337] PM: Hibernation image not present or could not be loaded.
[ 1.711372] registered taskstats version 1
[ 1.712996] rtc_cmos 00:05: setting system clock to 2014-09-23 19:42:11 UTC (1411501331)
[ 1.713167] Initializing network drop monitor service
[ 1.717042] Freeing unused kernel memory: 580k freed
[ 1.717282] Write protecting the kernel read-only data: 6144k
[ 1.725370] Freeing unused kernel memory: 648k freed
[ 1.733962] Freeing unused kernel memory: 688k freed
[ 1.742235] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.769627] udevd[49]: starting version 175
[ 1.827364] usbcore: registered new interface driver usbfs
[ 1.827426] usbcore: registered new interface driver hub
[ 1.849347] usbcore: registered new device driver usb
[ 1.850856] xhci_hcd 0000:00:10.0: setting latency timer to 64
[ 1.850868] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.850934] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
[ 1.851266] xhci_hcd 0000:00:10.0: irq 72 for MSI/MSI-X
[ 1.851285] xhci_hcd 0000:00:10.0: irq 73 for MSI/MSI-X
[ 1.851301] xhci_hcd 0000:00:10.0: irq 74 for MSI/MSI-X
[ 1.851461] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.851469] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.851476] usb usb1: Product: xHCI Host Controller
[ 1.851482] usb usb1: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.851488] usb usb1: SerialNumber: 0000:00:10.0
[ 1.856259] xHCI xhci_add_endpoint called for root hub
[ 1.856268] xHCI xhci_check_bandwidth called for root hub
[ 1.856371] hub 1-0:1.0: USB hub found
[ 1.856389] hub 1-0:1.0: 2 ports detected
[ 1.856568] xhci_hcd 0000:00:10.0: xHCI Host Controller
[ 1.856593] xhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 2
[ 1.856662] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.856669] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.856676] usb usb2: Product: xHCI Host Controller
[ 1.856682] usb usb2: Manufacturer: Linux 3.2.0-4-amd64 xhci_hcd
[ 1.856688] usb usb2: SerialNumber: 0000:00:10.0
[ 1.864814] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.867534] SCSI subsystem initialized
[ 1.879886] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.883153] xHCI xhci_add_endpoint called for root hub
[ 1.883161] xHCI xhci_check_bandwidth called for root hub
[ 1.883269] hub 2-0:1.0: USB hub found
[ 1.883287] hub 2-0:1.0: 2 ports detected
[ 1.885016] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.897930] libata version 3.00 loaded.
[ 1.898759] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 1.898795] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
[ 1.898818] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.898860] ehci_hcd 0000:00:12.2: debug port 1
[ 1.898911] ehci_hcd 0000:00:12.2: irq 17, io mem 0xf0c4d000
[ 1.905480] r8169 0000:04:00.0: (unregistered net_device): unknown MAC, using family default
[ 1.905513] r8169 0000:04:00.0: setting latency timer to 64
[ 1.905660] r8169 0000:04:00.0: irq 75 for MSI/MSI-X
[ 1.906986] r8169 0000:04:00.0: eth0: RTL8101e at 0xffffc9000509c000, 28:80:23:e4:95:a1, XID 04900000 IRQ 75
[ 1.908065] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 1.908142] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.908150] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.908158] usb usb3: Product: EHCI Host Controller
[ 1.908164] usb usb3: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.908170] usb usb3: SerialNumber: 0000:00:12.2
[ 1.908512] hub 3-0:1.0: USB hub found
[ 1.908527] hub 3-0:1.0: 4 ports detected
[ 1.908798] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 1.908825] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 1.908841] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
[ 1.908884] ehci_hcd 0000:00:13.2: debug port 1
[ 1.908924] ehci_hcd 0000:00:13.2: irq 17, io mem 0xf0c4b000
[ 1.908954] sdhci: Secure Digital Host Controller Interface driver
[ 1.908960] sdhci: Copyright(c) Pierre Ossman
[ 1.920070] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 1.920158] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.920167] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.920174] usb usb4: Product: EHCI Host Controller
[ 1.920180] usb usb4: Manufacturer: Linux 3.2.0-4-amd64 ehci_hcd
[ 1.920186] usb usb4: SerialNumber: 0000:00:13.2
[ 1.920524] hub 4-0:1.0: USB hub found
[ 1.920538] hub 4-0:1.0: 4 ports detected
[ 1.921263] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 1.921293] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
[ 1.921364] ohci_hcd 0000:00:12.0: irq 18, io mem 0xf0c4e000
[ 1.929732] thermal LNXTHERM:00: registered as thermal_zone0
[ 1.929741] ACPI: Thermal Zone [TSZ0] (41 C)
[ 1.930030] thermal LNXTHERM:01: registered as thermal_zone1
[ 1.930036] ACPI: Thermal Zone [TSZ2] (20 C)
[ 1.980796] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.980808] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.980815] usb usb5: Product: OHCI Host Controller
[ 1.980821] usb usb5: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 1.980827] usb usb5: SerialNumber: 0000:00:12.0
[ 1.981181] hub 5-0:1.0: USB hub found
[ 1.981197] hub 5-0:1.0: 4 ports detected
[ 1.981416] ahci 0000:00:11.0: version 3.0
[ 1.981614] ahci 0000:00:11.0: irq 76 for MSI/MSI-X
[ 1.981714] ahci 0000:00:11.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.981726] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp fbs pio slum part
[ 1.990770] scsi0 : ahci
[ 1.997412] scsi1 : ahci
[ 2.052985] ata1: SATA max UDMA/133 abar m1024@0xf0c4f000 port 0xf0c4f100 irq 76
[ 2.052997] ata2: SATA max UDMA/133 abar m1024@0xf0c4f000 port 0xf0c4f180 irq 76
[ 2.053072] sdhci-pci 0000:00:14.7: SDHCI controller found [1022:7813] (rev 1)
[ 2.053226] mmc0: no vmmc regulator found
[ 2.053320] Registered led device: mmc0::
[ 2.054404] mmc0: SDHCI controller on PCI [0000:00:14.7] using ADMA
[ 2.054496] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 2.054533] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 2.054576] ohci_hcd 0000:00:13.0: irq 18, io mem 0xf0c4c000
[ 2.112225] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 2.112235] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.112243] usb usb6: Product: OHCI Host Controller
[ 2.112248] usb usb6: Manufacturer: Linux 3.2.0-4-amd64 ohci_hcd
[ 2.112254] usb usb6: SerialNumber: 0000:00:13.0
[ 2.112643] hub 6-0:1.0: USB hub found
[ 2.112659] hub 6-0:1.0: 4 ports detected
[ 2.232206] usb 4-1: new high-speed USB device number 2 using ehci_hcd
[ 2.437676] usb 4-1: New USB device found, idVendor=064e, idProduct=9302
[ 2.437686] usb 4-1: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.437694] usb 4-1: Product: HP Truevision HD
[ 2.437699] usb 4-1: Manufacturer: SuYin
[ 2.437704] usb 4-1: SerialNumber: HF1016-T821-HN04-2-REV0103
[ 2.544204] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.545790] ata1.00: ATA-8: HGST HTS545050A7E680, GG2OAH10, max UDMA/100
[ 2.545801] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.547207] ata1.00: configured for UDMA/100
[ 2.547595] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 GG2O PQ: 0 ANSI: 5
[ 2.548066] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.552821] ata2.00: ATAPI: hp CDDVDW SU-208FB, HH00, max UDMA/100
[ 2.555576] ata2.00: configured for UDMA/100
[ 2.563889] scsi 1:0:0:0: CD-ROM hp CDDVDW SU-208FB HH00 PQ: 0 ANSI: 5
[ 2.575832] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 2.575842] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.576052] sd 0:0:0:0: [sda] Write Protect is off
[ 2.576060] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.576139] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.580141] Refined TSC clocksource calibration: 998.128 MHz.
[ 2.580156] Switching to clocksource tsc
[ 2.618323] sda: sda1 sda2 sda3
[ 2.619454] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.624864] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.625055] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 2.629777] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.629788] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.630161] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 3.191026] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 4.945200] ACPI Error: No handler for Region [RCM0] (ffff88011a67bf18) [SystemCMOS] (20110623/evregion-373)
[ 4.945219] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292)
[ 4.945233] ACPI Error: Method parse/execution failed [\_SB_.WMID.ESDT] (Node ffff88011a681ce0), AE_NOT_EXIST (20110623/psparse-536)
[ 4.945255] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._Q42] (Node ffff88011a6873d0), AE_NOT_EXIST (20110623/psparse-536)
[ 5.436769] udevd[345]: starting version 175
[ 6.285123] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 6.285140] ACPI: Power Button [PWRB]
[ 6.285362] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input2
[ 6.286997] ACPI: Lid Switch [LID]
[ 6.287182] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 6.287197] ACPI: Power Button [PWRF]
[ 6.288261] ACPI: acpi_idle registered with cpuidle
[ 6.290534] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 6.326383] acpi device:00: registered as cooling_device2
[ 6.326572] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input4
[ 6.326589] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 6.335499] wmi: Mapper loaded
[ 6.432427] ACPI: AC Adapter [ACAD] (off-line)
[ 6.582287] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 6.860269] ACPI: Battery Slot [BAT1] (battery present)
[ 7.016028] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 7.109587] ACPI: resource piix4_smbus [io 0x0b00-0x0b07] conflicts with ACPI region SMB0 [io 0xb00-0xb0f]
[ 7.109596] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.261309] powernow-k8: Found 1 AMD E1-2100 APU with Radeon(TM) HD Graphics (2 cpu cores) (version 2.20.00)
[ 7.261451] powernow-k8: 0 : pstate 0 (1000 MHz)
[ 7.261457] powernow-k8: 1 : pstate 1 (900 MHz)
[ 7.261462] powernow-k8: 2 : pstate 2 (800 MHz)
[ 7.279660] cfg80211: Calling CRDA to update world regulatory domain
[ 7.449425] input: HP WMI hotkeys as /devices/virtual/input/input6
[ 7.672212] ath9k 0000:03:00.0: setting latency timer to 64
[ 7.680517] ath: EEPROM regdomain: 0x60
[ 7.680524] ath: EEPROM indicates we should expect a direct regpair map
[ 7.680535] ath: Country alpha2 being used: 00
[ 7.680540] ath: Regpair used: 0x60
[ 7.938536] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 7.940596] Registered led device: ath9k-phy0
[ 7.940614] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90005180000, irq=36
[ 7.982729] Linux media interface: v0.10
[ 8.042760] Linux video capture interface: v2.00
[ 8.072582] uvcvideo: Found UVC 1.00 device HP Truevision HD (064e:9302)
[ 8.080383] input: HP Truevision HD as /devices/pci0000:00/0000:00:13.2/usb4/4-1/4-1:1.0/input/input7
[ 8.080968] usbcore: registered new interface driver uvcvideo
[ 8.080975] USB Video Class driver (1.1.1)
[ 8.258503] hda_intel: msi for device 103c:21f7 set to 0
[ 8.258640] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 8.337201] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.5, id: 0x1c0b1, caps: 0xf00133/0x240000/0xa2400
[ 8.416095] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 8.434352] cfg80211: World regulatory domain updated:
[ 8.434365] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8.434375] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.434384] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8.434393] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 8.434401] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8.434409] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8.434417] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 8.810577] HDMI status: Codec=0 Pin=3 Presence_Detect=0 ELD_Valid=0
[ 8.810900] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input9
[ 8.811605] hda_intel: msi for device 103c:21f7 set to 0
[ 8.982878] input: HD-Audio Generic Mic as /devices/pci0000:00/0000:00:14.2/sound/card1/input10
[ 8.983146] input: HD-Audio Generic Headphone as /devices/pci0000:00/0000:00:14.2/sound/card1/input11
[ 11.552717] EXT4-fs (sda3): re-mounted. Opts: (null)
[ 11.859033] EXT4-fs (sda3): re-mounted. Opts: errors=remount-ro
[ 12.095638] loop: module loaded
[ 14.817707] RPC: Registered named UNIX socket transport module.
[ 14.817715] RPC: Registered udp transport module.
[ 14.817720] RPC: Registered tcp transport module.
[ 14.817725] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 14.873184] FS-Cache: Loaded
[ 15.107763] FS-Cache: Netfs 'nfs' registered for caching
[ 15.212898] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 15.405122] r8169 0000:04:00.0: eth0: link down
[ 15.407019] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 18.108656] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input12
[ 21.327996] Bluetooth: Core ver 2.16
[ 21.328356] NET: Registered protocol family 31
[ 21.328364] Bluetooth: HCI device and connection manager initialized
[ 21.328375] Bluetooth: HCI socket layer initialized
[ 21.328382] Bluetooth: L2CAP socket layer initialized
[ 21.328941] Bluetooth: SCO socket layer initialized
[ 21.362074] Bluetooth: RFCOMM TTY layer initialized
[ 21.362091] Bluetooth: RFCOMM socket layer initialized
[ 21.362098] Bluetooth: RFCOMM ver 1.11
[ 21.506673] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 21.506683] Bluetooth: BNEP filters: protocol multicast
[ 21.859045] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 22.003982] lp: driver loaded but no devices found
[ 22.175917] ppdev: user-space parallel port driver
[ 24.654512] wlan0: authenticate with f8:03:8e:9f:e9:59 (try 1)
[ 24.658062] wlan0: authenticated
[ 24.677086] wlan0: associate with f8:03:8e:9f:e9:59 (try 1)
[ 24.686887] wlan0: RX AssocResp from f8:03:8e:9f:e9:59 (capab=0x411 status=0 aid=1)
[ 24.686899] wlan0: associated
[ 24.693260] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 33.792421] [Firmware Bug]: battery: (dis)charge rate invalid.
[ 8313.851765] cfg80211: Calling CRDA to update world regulatory domain
[ 8313.867694] cfg80211: World regulatory domain updated:
[ 8313.867706] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8313.867717] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8313.867726] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8313.867734] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 8313.867743] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8313.867751] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8313.867759] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 8327.058850] wlan0: authenticate with f8:03:8e:9f:e9:59 (try 1)
[ 8327.060796] wlan0: authenticated
[ 8327.078376] wlan0: associate with f8:03:8e:9f:e9:59 (try 1)
[ 8327.088289] wlan0: RX ReassocResp from f8:03:8e:9f:e9:59 (capab=0x411 status=0 aid=1)
[ 8327.088300] wlan0: associated
[ 8698.099731] wlan0: deauthenticating from f8:03:8e:9f:e9:59 by local choice (reason=3)
[ 8698.146695] cfg80211: Calling CRDA to update world regulatory domain
[ 8698.198714] cfg80211: World regulatory domain updated:
[ 8698.198724] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8698.198733] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8698.198741] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8698.198748] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 8698.198754] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8698.198761] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8698.198767] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 8702.026969] wlan0: authenticate with f8:03:8e:9f:e9:59 (try 1)
[ 8702.028900] wlan0: authenticated
[ 8702.046614] wlan0: associate with f8:03:8e:9f:e9:59 (try 1)
[ 8702.056610] wlan0: RX ReassocResp from f8:03:8e:9f:e9:59 (capab=0x411 status=0 aid=1)
[ 8702.056625] wlan0: associated
[ 8713.520171] wlan0: no IPv6 routers present
[ 8748.214647] wlan0: deauthenticating from f8:03:8e:9f:e9:59 by local choice (reason=3)
[ 8748.265081] cfg80211: Calling CRDA to update world regulatory domain
[ 8748.284417] cfg80211: World regulatory domain updated:
[ 8748.284428] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 8748.284437] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8748.284445] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 8748.284453] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 8748.284461] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8748.284468] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 8748.284476] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 8752.115820] wlan0: authenticate with f8:03:8e:9f:e9:59 (try 1)
[ 8752.117723] wlan0: authenticated
[ 8752.138768] wlan0: associate with f8:03:8e:9f:e9:59 (try 1)
[ 8752.148736] wlan0: RX ReassocResp from f8:03:8e:9f:e9:59 (capab=0x411 status=0 aid=1)
[ 8752.148751] wlan0: associated
[ 8763.512171] wlan0: no IPv6 routers present
[ 9392.074786] wlan0: deauthenticating from f8:03:8e:9f:e9:59 by local choice (reason=3)
[ 9392.122988] cfg80211: Calling CRDA to update world regulatory domain
[ 9392.160163] cfg80211: World regulatory domain updated:
[ 9392.160172] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 9392.160180] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9392.160187] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[ 9392.160194] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[ 9392.160201] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 9392.160207] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[ 9392.160214] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 9400.460304] PM: Syncing filesystems ... done.
[ 9400.462361] PM: Preparing system for mem sleep
[ 9400.462416] Freezing user space processes ... (elapsed 0.01 seconds) done.
[ 9400.476270] Freezing remaining freezable tasks ... (elapsed 0.01 seconds) done.
[ 9400.492286] PM: Entering mem sleep
[ 9400.492625] Suspending console(s) (use no_console_suspend to debug)
[ 9400.493163] sd 0:0:0:0: [sda] Synchronizing SCSI cache
[ 9400.536306] sd 0:0:0:0: [sda] Stopping disk
[ 9400.676299] ACPI handle has no context!
[ 9401.164273] PM: suspend of devices complete after 671.344 msecs
[ 9401.164744] r8169 0000:04:00.0: wake-up capability enabled by ACPI
[ 9401.196869] ehci_hcd 0000:00:13.2: wake-up capability enabled by ACPI
[ 9401.212316] ohci_hcd 0000:00:13.0: wake-up capability enabled by ACPI
[ 9401.212414] ehci_hcd 0000:00:12.2: wake-up capability enabled by ACPI
[ 9401.228324] ohci_hcd 0000:00:12.0: wake-up capability enabled by ACPI
[ 9401.228450] xhci_hcd 0000:00:10.0: wake-up capability enabled by ACPI
[ 9401.244325] PM: late suspend of devices complete after 80.035 msecs
[ 9401.244374] ACPI: Preparing to enter system sleep state S3
[ 9401.247072] ACPI Error: No handler for Region [RCM0] (ffff88011a67bf18) [SystemCMOS] (20110623/evregion-373)
[ 9401.247086] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292)
[ 9401.247098] ACPI Error: Method parse/execution failed [\_SB_.WMID.ESDT] (Node ffff88011a681ce0), AE_NOT_EXIST (20110623/psparse-536)
[ 9401.247116] ACPI Error: Method parse/execution failed [\_PTS] (Node ffff88011a66b588), AE_NOT_EXIST (20110623/psparse-536)
[ 9401.247156] PM: Saving platform NVS memory
[ 9401.270528] Disabling non-boot CPUs ...
[ 9401.272367] CPU 1 is now offline
[ 9401.273429] ACPI: Low-level resume complete
[ 9401.273429] PM: Restoring platform NVS memory
[ 9401.273429] Enabling non-boot CPUs ...
[ 9401.273429] Booting Node 0 Processor 1 APIC 0x1
[ 9401.273429] smpboot cpu 1: start_ip = 9a000
[ 9401.272337] Calibrating delay loop (skipped) already calibrated this CPU
[ 9401.306064] NMI watchdog enabled, takes one hw-pmu counter.
[ 9401.306698] CPU1 is up
[ 9401.308953] ACPI: Waking up from system sleep state S3
[ 9401.312532] xhci_hcd 0000:00:10.0: wake-up capability disabled by ACPI
[ 9401.312678] ohci_hcd 0000:00:12.0: wake-up capability disabled by ACPI
[ 9401.328332] ehci_hcd 0000:00:12.2: wake-up capability disabled by ACPI
[ 9401.328420] ohci_hcd 0000:00:13.0: wake-up capability disabled by ACPI
[ 9401.344331] ehci_hcd 0000:00:13.2: wake-up capability disabled by ACPI
[ 9401.345059] PM: early resume of devices complete after 33.097 msecs
[ 9401.345251] snd_hda_intel 0000:00:01.1: setting latency timer to 64
[ 9401.345340] xhci_hcd 0000:00:10.0: setting latency timer to 64
[ 9401.349297] sd 0:0:0:0: [sda] Starting disk
[ 9401.349887] r8169 0000:04:00.0: wake-up capability disabled by ACPI
[ 9401.388352] r8169 0000:04:00.0: eth0: link down
[ 9401.616209] usb 4-1: reset high-speed USB device number 2 using ehci_hcd
[ 9401.840223] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 9401.852781] ata2.00: configured for UDMA/100
[ 9403.356204] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 9403.359168] ata1.00: configured for UDMA/100
[ 9404.039560] PM: resume of devices complete after 2694.421 msecs
[ 9404.039839] PM: Finishing wakeup.
[ 9404.039844] Restarting tasks ... done.
[ 9404.053159] video LNXVIDEO:00: Restoring backlight state
[ 9406.594944] ACPI Error: No handler for Region [RCM0] (ffff88011a67bf18) [SystemCMOS] (20110623/evregion-373)
[ 9406.594962] ACPI Error: Region SystemCMOS (ID=5) has no handler (20110623/exfldio-292)
[ 9406.594975] ACPI Error: Method parse/execution failed [\_SB_.WMID.ESDT] (Node ffff88011a681ce0), AE_NOT_EXIST (20110623/psparse-536)
[ 9406.594997] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPC0.EC0_._Q42] (Node ffff88011a6873d0), AE_NOT_EXIST (20110623/psparse-536)
[ 9412.335867] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 9414.558097] wlan0: authenticate with f8:03:8e:9f:e9:59 (try 1)
[ 9414.560066] wlan0: authenticated
[ 9414.578261] wlan0: associate with f8:03:8e:9f:e9:59 (try 1)
[ 9414.588135] wlan0: RX AssocResp from f8:03:8e:9f:e9:59 (capab=0x411 status=0 aid=1)
[ 9414.588147] wlan0: associated
[ 9414.594430] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 9439.336299] usb 1-2: new full-speed USB device number 2 using xhci_hcd
[ 9439.360674] usb 1-2: device descriptor read/8, error -71
[ 9439.488672] usb 1-2: device descriptor read/8, error -71
[ 9439.704308] usb 1-2: new full-speed USB device number 3 using xhci_hcd
[ 9439.738639] usb 1-2: New USB device found, idVendor=0a12, idProduct=0001
[ 9439.738652] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 9439.827308] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 9439.830716] usbcore: registered new interface driver btusb
TheBalrog
BOFH
Registrado: 2004-04-05
Mensajes: 3012

Publicado: 2014-09-24 01:50:16    Asunto:

Cuando insertes la tarjeta, haz el dmesg. Los ?ltimos mensajes deber?an ser del dispositivo que haz insertado. Ya te lo dije en otro mensaje.
Daniel Chiesa
Forista
Registrado: 2014-09-22
Mensajes: 7

Publicado: 2014-09-24 02:46:07    Asunto:

eso es lo que he hecho.





La marca registrada Linux (R) se usa siguiendo la sublicensia obtenida del "Linux Mark Institute",
el LICENCIATARIO exclusivo de Linus Torvalds, propietario de la marca en EEUU y otros países
The registered trademark Linux (R) is used pursuant to a sublicense from the Linux Mark Institute,
the exclusive LICENSEE of Linus Torvalds, owner of the mark in the U.S. and other countries